Vs510 50W 0.7A High Performance Servo Drive with a New Commission-Free Function

• Application: Industrial
• Speed: High Speed
• Number of Stator: Three-Phase
• Model NO.: VS510-R70AP-D1B
• Function: Driving, Control
• Number of Poles: 8
• Certification: ISO9001, CE
• Rated Current: 0.7A
• Power: 0.05kw
• Rated Speed: 3000-6000rpm
• Rated Torque: 0.16nm
• Rated Flange: 40
• Transport Package: Box
• Specification: High Performance Servo Drive 220V
• Trademark: Shenzhen V&T
• Origin: China

Product Description

 

Product Description

VS510 series servo drives make simpler operation and higher efficiency.
VS510 also equipped with a new commissioning-free function, which breaks the convention that servo drives cannot operate smoothly without commissioning and realizes immediate use The new high-level auto-settling function of the VS510 series servo drives reduces the installation time and maximize mechanical performance.

Servo Drive Model Description

Servo Selection List

220V

380V

Structure types

220V

380V

Servo Drive Specifications

220V

Servo drive		Series
		VS510		VS512
Main circuit powe cupply	Voltage	220V/50H		220V/50Hz
	Input voltage range	AC 220V±15%		AC220V±15%
	Input freguency range	47Hz~63Hz		47Hz~63Hz
Contro circuit power supply	Power range	50W-750W	1kW-2kW	50W-750W	1kW-3kW
	Volatge	220V/50Hz		220V/50Hz
	Innut yoltage range	AC 220V±15%		AC220V±15%
	Input frequency range	47Hz~63Hz		47Hz~63Hz
Interface power supply	Voltage	DC12V~24V
	Aowable voltage flucuation	10%
	Power capacity	>500mA
Control mode		Vector control,SVPWM
System control mode		Position control,speed control and vector control
Encoder		Support 17-bits encoder/23-bits single-turn encoder/multi-turn encoder.		Support 23-bits Tamagawa Multi-turn absolute encoder
Brake chopper/resistor		750W and below without internal brake resistor
DC reactor		No
Digital	Digital inputs	8 optocoupler isolation digital inputs
	Digitaloutputs	4 open collector outputs
Analog	Analog inputs	2 analog inputs,range:DC-10 ...+10V
	Anolog outouts	1 analog output,range:DC0...+10V
Pulse	Pulse inputs	2 pulse inputs,5V differential input or open collector input
	Pulse outputs	4 pulse outputs,3 frequency division differential outputs (encoder A/B/Z),1Z phase output
Protection function		Overcurrent protection,overvoltage protection,overload protection,overheat protection,encoder Detection,brake chopper/resistor fault protection,undervoltage protection,overspeed protection Large position error protection etc.
Position control	Input pulse frequency	4MHz(differential input),200kHz(open-collector input)
	Command pulse form	Sign+pulse train,CCW+CW pulse train,two-phase pulse with 90°phase differential.
	Position precisior	±1±1 pulse
	In-place rangesetting	±10±10 pulse
	Torque control range	Set by parameter or external analog input:DC0~±10V;Max torque:300%of rated torque
Speed control	Frequency response	2.3kHz                                    3.0kHz
	Speed control range	Speed regulation range:1:5000
	Speed reference by AI	DC0~±10V(max.speed),12bitA/D
	Speed  fluctuation  ratio	±0.03%
Torque  control	Torque control range	Set by parameter or external analog input;DC0~±10V;Max torque:300%of rated torque
	Torque reference by AI	DC0~±10V/max torque,12bitA/D
	Torque linearity	±10%below
	Speed control range	Set by parameter setting or external analog input DC0~±10V(Max speed)
Maximum allowable inertia		30 times
Communication		EtherCAT is optiona l;485 communication is not supported.
Structure		IP level:IP20.Cooling mode:≤750-self cooling,above 750W -fan cooling
Environment	Working temperature	0~45ºC
Storage temperature	20~80ºC(No freezing)
Humidity	Working/Storage:≤90%RH(No condensation)
Operating site	Indoor(away from direct sunlight),free of corrosive gases,combustible gases,oil mist,dust etc.
Altitude	Derate use when the altitude is higher than 1000m
Vibratior	≤4.9m/s,10~60Hz(Not allowed to work at the resonance point)

380V

Servo Drive		Series
		VS510	VS512
Main Piocwer Supply	Voltage	380V/50Hz	380V/50Hz
	Input voltage range	AC 380V±15%	AC 380V±15%
	Input frequency range	47Hz~63Hz	47Hz~63Hz
Control  circuit power supply	Power range	1kW-3kW	1kW-5kW
	Voltage	380V/50Hz	380V/50Hz
	Input voltage range	AC 380V±15%	AC380V±15%
	Input frequency range	47Hz~63Hz	47Hz~63Hz
Interface Power Supply	Voltage	DC12V~24V
	Allowable voltage fluctuatior	±10%
	Power capacity	Above 500 mA
Control		Vector control,SVPWM
System control mode		Position control, speed control and vector control
Encoder		17-bits encoder,23-bits singleturn encoder, multiturn encoder	23-bits Tamagawa multiturn absolute encoder
Braking uni		≤750W without internal brake resistor
DC react		No
Digital	Digital   inputs	8 optocoupler isolation digital inputs
	Digital outputs	4 open collector outputs
Analog	Analog inputs	2 analog inputs,range:DC-10 ...+10V
	Analog outputs	1 analog output,range:DC0...+10V
Pulse	Pulee input	2 pulse inputs,5V differential inputs or open collector inputs
	Pulse outputs	4 pulse outputs,3 frequency division differential outputs (encoder A/B/Z),1Z phase output
Protection Functions		Overcurrent protection,overvoltage protection,overload protection,overheat protection,encoder fault protection,brake chopper/resistor fault protection,undervoltage protection, overspeed protection,large position error protection etc.
Position Control	Input pulse frequency	4MHz(differential input),200kHz (open collector input)
	Command pulse form	Sign+pulse train,CCW+CW pulse train,two-phase pulse with 90°phase differential.
	Position precision	±1 pulse
	In-place range setting	±10 pulse
	Torque control range	Set by parameter or external analog input;DC 0... ±10V;Max torque:300%of rated torque
Speed  control	Frequency response	2.3kHz                                                                                                                                                     3.0kHz
	Speed control range	Speed regulation scope:1:5000
	Speed reference by Al	DC0... ±10V(max.speed),12bitA/D
	Speed fluctuation ratio	+0.03%
Torque control	Torque control range	Set by parameter or external analog input;DC0... ±10V;Max torque:300%of rated torque
	Torque reference by AI	DC 0... ±10V(max torque),12bitA/D
	Torque linearity	Below±10%
	Speed control range	Set by parameter or external analog input;DC0... ±10V(max.torque)
Maximium allowable inertia		30 time
Communication		EtherCAT communication is optional,485 communication is not supported.
Structure		IP level:IP20.Cooling mode:≤750-self cooling;above 750W-fan cooling
Environment	Working environment	0~45ºC
	Storage environment	20~80ºC(No freezing
	Humidit	Working/Storage:≤90%RH(No condensation)
	Operating site	Indoor (away from direct sunlight),free of corrosive gases,combustible gases,oil mist,dust etc
	Altitude	Derate use when the altitude is higher than 1000m.
	Vibratior	≤4.9m/s,10~60Hz(Not allowed to work at the resonance point)

 

Connection Diagram

D5 structure type

D1,D2,D3,D4 structure type

..................................................................