V5-H AC Drives/Frequency Inverter Single/Three Phase 132kw

• Application: High-performance Transducer, Three Phase Transducer, General Transducer, High Frequency Converter Transducer
• Output Type: Triple
• Principle of Work: Vector Control Transducer
• Model NO.: V&T V5-H
• Switch Mode: PWM Control
• Main Circuit Type: Voltage
• Voltage of Power Supply: Low Voltage Variable-Frequency Drive
• Link of Transformation: AC-DC-AC Variable-Frequency Drive
• Nature of DC Power: Voltage Variable-Frequency Drive
• Function: Simple Type, Elevator Special, Textile Special, Constant Torque Universal Type
• Overload Capacity: 115% 1 Minute, 160% 0.5 Second, Interval: 10 Minut
• Voltage (V): Three−phase 0 to Rated Input Voltage
• Rated Voltage/Frequency: Three−phase 380V/480V; 50Hz/60Hz
• Protection Class: IP20
• Transport Package: Wood
• Specification: Unit
• Trademark: V&T
• Origin: China
• HS Code: 8504409999
• Production Capacity: 80, 000, 000

Product Description

V5-H Series high performance vector control inverter

For over two decades, various industry sectors have been reaping the benefits of V&T's cost-effective, performance-oriented AC Drive solutions. V&T's grasp of specific needs of each industry enables it to offer application-specific solutions for various industries-such as processing ,textile, plastic, ceramic ,pharmaceutical, elevator, oil& gas, power, cement and material-handling.

Main Features

1. Range:0.4 kW to 450kW
2. V/F Sensorless Vector Control, Slip Compensation
3. Staring Torque at 180% at 0.25 Hz for Sensorless Control
4. Component Life Monitor
5. Peer to Peer Communication to share I/Os
6. Built-in PLC logic
7. Multi Keypad
8. Stores last 5 faults
9. Built-in RS485 Modbus RTU Communication

About the Product

V5-H series vector control inverter adds a new dimension to V&T's AC drive solutions. Built to V&T's stringent quality standards, the V5-H is tested and certified to meet global benchmarks, giving you the assurance of total reliability. The V5-H is built to deliver powerful performance. It produces a starting torque of 180% at 0.5Hz, which provides better control at low-speed. Its compact size enables panel-size reduction, hence helps in space-efficient design.

Applications

1. Energy-saving central air conditioning;
2.  Plastic &Textile Machinery;
3. Energy-saving air compressor;          
4. Printing;
5. Fan & Pump / HVAC/AHU/Blowers machine /ID/FD Fan
6. Crane Control;           
7. Food & Packaging Industry;         
8. AHU Control.

Model Description

Nameplate Description

Technical Specifications

 

Control characteristics	Control mode	Vector control 1	Vector control 2 (Without encoder)
	Starting torque	0.50Hz   180%	0.25Hz   180%
	Range of speed regulation	1:100	1:200
	Precision of steady speed	± 0.5%	± 0.2%
Product  functions	Key functions	Under-voltage regulation, switchover of run command source(operation panel, terminal and communication), speed tracing function, torque limit, multi− step frequency reference(up to 23 step frequency), motor data identification, S curve acceleration and deceleration, slip compensation, PID   regulation, droop control, current limit, switch-over between torque control and speed control, manual torque boost and auto torque boost, programmable digital inputs and programmable digital outputs
	Frequency reference mode	Parameter   setting,   operation   panel   UP/DN,   terminal,   terminal   UP/DN, communication, analog ( AI1/AI2/AI3), pulse DI , etc.
	Frequency range	0.00 ~ 300.00Hz Note: In  the  control  mode  of  vector  control  1,  frequency  range  from  0.0Hz  to 3000.0Hz can be customized according to the customer demand
	Start frequency	0.00 ~ 60.00Hz
	Acceleration time and deceleration time	0.1 ~ 36000s
	Dynamic braking	Braking unit action voltage: 650 ~ 750V; operating time: 100.0s The braking unit can be built-in for V5−H−4T75G and below equipment
	DC braking	DC braking start frequency: 0.00 ~ 300.00Hz DC braking current: constant torque: 0.0 ~ 120.0%, variable torque: 0.0 ~ 90.0% DC braking time: 0.0 ~ 30.0s; DC braking function does not required waiting time to start to realize quick braking
	Magnetic flux braking	Enabled or disabled during deceleration are optional, the default setting is enabled
Unique   functions	Multi-function M key	The unique multi-function key can be set to frequently used operations: such as JOG, emergency stop, switchover of run command source, switchover of parameters display mode, etc.
	Multiple parameters display modes	Basic parameters display mode, fast parameters display mode, non−factory setting parameters display mode, last changed 10 parameters display mode
	Parameters copy	The standard operation panel can realize the parameters upload, download and  display  the  copy  progress.  Users  can  set  to  forbid  overwriting  the uploaded parameters
	Displayed and hidden parameters group	The  customer  can   select  to   display  or  hide  the   parameters  group  by themselves
	Dual 485 communication ports	Dual   485   communication   ports   support   Modbus   protocol   (RTU).   The maximum distance is 500 meters
	Operation panel	Key type or shuttle type operation panel are optional Protection level: IP20 as standard, IP54 as option
	Common DC bus	All series product support common DC bus
	Independent duct	All   series   product   adopts   independent   duct   design   and   supports   the installation of heat-sink outside the cabinet

	Universal expansion interface	Universal  expansion  board  equipped  with  CPU  for  supporting  customers secondary  development:   physical   interface   SPI   bus,  software   protocol Modbus
	Expansion card	Injection molding machine interface card, PG feedback card, air compressor control   card,   communication   adapter  card,  three   phase   power  supply monitoring  card,  three   phase-sequence  detection  card,  external   power rectifying card
	Power-On-Self-Test (POST)	Realizing  the   POST  of  internal  and   peripheral  circuits,   including   motor grounded,   abnormal    +10V   power    supply   output,    analog    input   and disconnection, etc.
Protection function	Power supply under-voltage, over-current protection, over-voltage protection, interference protection, abnormal comparison  level,  motor data  identification failure,  module(IPM)  protection,  heat-sink over temperature protection, inverter overload protection, motor overload protection, peripheral protection, abnormal current detection, output short circuit to ground , interruption of power supply when in running status, abnormal input power, output phase loss, abnormal EEPROM protection, abnormal pre-charging contactor detection, temperature sampling disconnection, encoder disconnection, abnormal +10V power supply,  abnormal  analog  input,  motor  over temperature  protection(PTC),  abnormal  communication, abnormal  software  version  compatibility,  abnormal  copying,  abnormal  expansion  card  connection, terminal mutual exclusion detection, hardware overload protection
Efficiency	At rated power: 7.5kW and below power class ≥93% 45kW and below power class ≥95%  55kW and above power class ≥98%
Environment	Operating site	The product should be mounted vertically in the electric control cabinet with good ventilation. Horizontal or other installation modes are not allowed. The cooling medium is the air. The product should be installed in the environment without dust, corrosive gas, combustible gas, oil mist, steam, drip and free from direct sunlight
	Ambient temperature	−10  to  +40ºC,  the  product  must  be  de-rated  rated  output  current  for  the ambient temperature between 40ºC to 50ºC, the rated output current must be de-rated for 1% per 1ºC temperature rise
	Humidity	5 to 95%, no condensing
	Altitude	0 to 2000m, the product must bede-rated rated output current for the altitude above 1000 meters, the rated output current must bede-rated for 1% per 100 meters rise
	Vibration	3.5m/s2,2 to 9Hz; 10 m/s2,9 to 200Hz; 15 m/s2,200 to 500Hz
	Storage temperature	−40 to +70ºC

 

Component Name

Mounting Dimension and Weight

Type	Terminal	Description	Technical specification
Terminal RS485	RS485+	Positive end of RS485	Rate: 4800/9600/19200/38400/57600bps Up to 32 sets of equipment can be paralleled. Relay shall be used if the number exceeds 32 Maximum distance: 500m
	RS485−	Negative end of RS485
	GND	Ground terminal of RS485 shielding layer	Internal isolated with COM
Operation panel     RS485	CN7	RS485 port of operation panel	The  maximum  distance  between  the  operation  panel and the operation panel interface is 15 meters (standard twisted shielded network cable)
Digital input	+24V	+24V	24V±10%, internal isolated with GND Maximum output current: 200mA, with overload and short circuit protection
	PLC	Power supply of multi−function input terminal	Short circuited with +24V by default
	X1 ~ X6	Multi−function input terminals 1 ~ 6	Input specification: 24VDC,5mA Frequency range: 0 ~ 200Hz Voltage range: 24V±20%
	X7/DI	Multi−function input or pulse input	Multi−function input: same as X1 ~ X6 Pulse input: 0.1kHz ~ 50kHz Voltage range: 24V±20%
	COM	Ground terminal for +24V	Internal isolated with GND
Digital output	Y1	Open collector output	Voltage range: 24V±20%, maximum input current: 50mA
	Y2/DO	Open collector or pulse output	Open collector: same as Y1 Pulse output frequency: 0 ~ 50kHz Pulse output voltage range: 24V±20%
	COM	Open collector output common end	Internal isolated with GND
Analog input	+10V	Analog input reference voltage	10V ±3%, internal isolated with COM Maximum output current: 10mA, with short circuit and overload protection
	AI1	Analog input channel 1	0~20mA:   input impedance 500ohm maximum input current: 30mA 0~10V:       input impedance 20kohm maximum input voltage: 15V Resolution: 12 bits (0.025%) 0 ~ 20mA or 0 ~ 10V input can be selected by jumper
	AI2	Analog input channel 2
	AI3	Analog input channel 3	−10V ~ 10V: input impedance 20kohm Resolution: 12 bits (0.025%) Maximum input voltage: ±15V
	GND	Analog ground terminal	Internal isolated with COM If connects  adjustable  potentiometer  between  +10V and GND, the resistance of the potentiometer shall be more than 5kΩ
Analog output	AO1	Analog output 1	0 ~ 20mA: allowable output impedance 200 ~ 500ohm 0 ~ 10V: allowable output impedance ≥10kohm Output precision: 2% Resolution: 10 bits (0.1%), with short circuit protection 0 ~ 20mA or 0 ~ 10V output can be selected by jumper
	AO2	Analog output 2
	GND	Analog ground terminal	Internal isolated with COM
Relay output	RA/RB/RC	Relay output	RA−RB: normally closed RA−RC: normally open Contact capacity: 250VAC/1A, 30VDC/1A